Why Choose Quality Manufacturing Co Bandmills?

Edgers

Loaders/Trailers

Harvesting Heads

Tractor Log Winches

Brush Chippers

Check out our Woodchuck Portable Sawmill! Prices Start at $5249

Quality Manufacturing Co Bandmills Why Choose a Quality Bandsaw Mill?

Click for the big picture!

Quality sawmills are made in a 35,000 sq. ft. factory with 6 overhead cranes, full machine shop, automatic saws, and jigs that are specially built so that every mill is the same as the one before it.

We believe there is no stronger way to build a mill than using a full frame with a 4 post head. This system will prevent problems over the long haul. We also use chrome rods with oilite bushings to maintain close fit with freedom of movement.

We have the biggest selection of power sources in the business!!
Gas, diesel, electric, 5 to 40 hp. Honda, Briggs, Kohler, Kawasaki, Lambardini, Kubota.

We use solid steel V-groove wheels with greaseable bearing. They have a built-in relief angle that will allow the carriage to move easily down the track and give the operator a good feel for the cut and resistance. This will prevent running dull bands that can degrade the lumber, cause band guides to wear out faster, and reduce the number of times a band can be sharpened.

All Quality sawmills have squaring pins that are operated by one handle, and can be raised to any height needed. This saves time and increases your production.

We manufacture our own band guides to our specifications. We don't use universal guides. Our guides have a bearing to hold the band when cutting hard, and carboloy shoes to hold it straight. We support the top and the bottom of the band for unbeatable accuracy and less band fatigue.

All base prices quoted are for bandmills that include the trailer package with tail lights (except the Wood Chuck and sectional models).

All Quality trailer mounted mills can be lowered to the ground by pulling four bolts and removing the axle, for easy log loading.

Quality makes full frame mills that are ready to roll, or, for long distance shipping, we make sectional mills that can include as many eight foot frame sections as you will require.

Back to:

|Ask a Question|Grizzly 36 Photos||Hydraulic Mill Photos||Shipping Cost||On-Line Video|

Quality Bandsaw Mills are made in America MADE IN AMERICA
Manufactured at
715 Erie Blvd East
Rome, NY 13440
1-888-315-6166 Toll Free
1-800-BANDMIL Toll Free

Request a catalog!

© Copyright 2000 - 2005 Quality Manufacturing Co. All Rights Reserved

Web site created and maintained by Western Web Publishing

Click for the big picture!
	Quality sawmills are made in a 35,000 sq. ft. factory with 6 overhead cranes, full machine shop, automatic saws, and jigs that are specially built so that every mill is the same as the one before it.
	We believe there is no stronger way to build a mill than using a full frame with a 4 post head. This system will prevent problems over the long haul. We also use chrome rods with oilite bushings to maintain close fit with freedom of movement.
	We have the biggest selection of power sources in the business!! Gas, diesel, electric, 5 to 40 hp. Honda, Briggs, Kohler, Kawasaki, Lambardini, Kubota.
	We use solid steel V-groove wheels with greaseable bearing. They have a built-in relief angle that will allow the carriage to move easily down the track and give the operator a good feel for the cut and resistance. This will prevent running dull bands that can degrade the lumber, cause band guides to wear out faster, and reduce the number of times a band can be sharpened.
	All Quality sawmills have squaring pins that are operated by one handle, and can be raised to any height needed. This saves time and increases your production.
	We manufacture our own band guides to our specifications. We don't use universal guides. Our guides have a bearing to hold the band when cutting hard, and carboloy shoes to hold it straight. We support the top and the bottom of the band for unbeatable accuracy and less band fatigue.
	All base prices quoted are for bandmills that include the trailer package with tail lights (except the Wood Chuck and sectional models).
	All Quality trailer mounted mills can be lowered to the ground by pulling four bolts and removing the axle, for easy log loading.
	Quality makes full frame mills that are ready to roll, or, for long distance shipping, we make sectional mills that can include as many eight foot frame sections as you will require.

Back to:

\|Ask a Question\|Grizzly 36 Photos\|\|Hydraulic Mill Photos\|\|Shipping Cost\|\|On-Line Video\|

Request a catalog!
© Copyright 2000 - 2005 Quality Manufacturing Co. All Rights Reserved